Facebook
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660

Ultrasonic Fog Cooler T-660

No.T-660
OEM car cleaning tool ultrasonic atomizer car wash car atomizer sterilization T-660
Color:
Red
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660
  • Ultrasonic Fog Cooler T-660

Description

Ultrasonic Fog Cooler T-660
Quick Details
Type:
Other, Car Washer
Place of Origin:
Guangdong, China
Brand Name:
SURAINBOW
Model Number:
T-660
Product name:
Ultrasonic Fog Cooler
Color:
Red
Keyword:
Air purification atomizer
Weight:
2.030KG
Size:
37cm*23cm*36cm
MOQ:
10pcs
Use:
Car indoor air purification atomizer
Brand:
SURAINBOW
Other Service:
OEM or ODM



Product Overview

This ultrasonic fog cooler turns a liquid atomizing product into a cool, fine fog that spreads through the cabin air instead of landing on the dashboard as droplets. It handles the interior-air step of a car care job, once the carpets are vacuumed and the trim is wiped.

Because the unit is built by an ultrasonic fog cooler manufacturer rather than assembled from mixed sources, the housing, the board behind the front panel and the carton follow one specification from the first order to the third.

For buyers who want their own name on the machine, it can run as an ultrasonic atomizer oem project — the panel print, the label language and the carton artwork are reviewed against your brief before production, and the appliance itself stays the same.

A detail studio, a wash chain or a used-car lot runs it as a finishing service rather than as a cleaning step: the car goes in, the unit runs, and the cabin goes back to the customer without the smell of the last job in it.

It sits between the vacuum and the handover. The vacuum takes what is loose, the cloth takes what is stuck, and the fog takes what is left in the air and in the foam — the part a customer notices first when the door opens.

Red and black car beauty foam machine with digital display and top nozzle

Key Features

  • Ultrasonic fog instead of a wet spray — a car ultrasonic atomizer breaks the liquid into a mist fine enough to hang in the cabin air, so the treatment reaches the vents and the headliner without soaking the trim.
  • Digital front panel with a touch power button — the display shows the running state in clear digits, so starting or stopping a cycle takes one touch rather than a sequence a new operator has to memorise.
  • Top-fill spout in black on the roof of the housing — the liquid goes straight in from the bottle while the unit stands where it works, with no tank to unscrew from the base.
  • Side carry handle — one hand lifts the unit between bays, into a van for mobile work, or onto a shelf at the end of the day.
  • Rounded glossy housing on black feet — it sits flat on a bench or the workshop floor without rocking while the cycle runs, and the smooth casing wipes down in seconds between jobs.
  • Ready for your own branding — as an ultrasonic atomizer oem supply, the unit can carry your label, your carton artwork and your language instead of ours.
  • Two programmes from one machine — run it as an ultrasonic sterilization atomizer for hygiene work and as an odour treatment for everything else, with no second unit to buy.
  • No compressor and no propellant can — the machine runs on its own, so the air line stays free for the tornado guns and the polisher.

Atomizing Liquid & Dosing

The unit is filled with an atomizing liquid you choose. It carries no chemistry of its own, so the liquid, its strength and the dose per car are settled before the first job — and they follow the product you intend to run and the market you sell into.

Ask before you buy the liquid, not after. As an ultrasonic fog cooler manufacturer we can tell you which products are approved for the tank and which will leave a residue on the plate or a film on the glass.

Buy a liquid that is intended for fogging. A concentrate an ultrasonic sterilization atomizer product is formulated for the tank; a surface spray sold for the same job is not, and the two are not interchangeable once they are inside the machine.

Tank capacity decides how many cars one fill covers, so ask us for the exact volume of the version we ship you before you price the service. A car air purification atomizer run at the wrong dose either wastes liquid or pushes more fog into the cabin than the job needs.

Liquid quality shows up as maintenance. A low-cost concentrate that leaves mineral residue coats the ultrasonic plate, cuts the fog output and costs more in cleaning time than it saves per litre.

Stay with the same liquid across a season where you can. Switching products changes both the smell and the residue, and any complaint then lands on your service rather than on the chemical.

Service Scenarios

  • Shops adding interior air care — most start with one unit from a car atomizer supplier they already buy bay equipment from, run it for a month, then decide how many bays need their own machine.
  • Rideshare, taxi and fleet cars — these cabins take more people per week than a private car, so the unit gives the driver a way to answer an odour complaint between deep cleans.
  • Used-car and trade-in preparation — a car air purification atomizer cycle before the photographs takes the previous owner's smell out of the cabin, which is often the first thing a buyer notices at the door.
  • Post-repair and valet handover — after bodywork or a full interior clean, the fog cycle is the last step before the car goes back to its owner.
  • Pet, smoke and food odour — where the source is gone but the smell sits in the foam and the headliner, a car wash atomizer run reaches surfaces a spray bottle never gets to.
  • Detailing chains standardising a process — one unit per bay, run the same way, keeps the interior-air step identical across sites, so a customer gets the same result at any branch.

Operating Sequence

  1. Check the unit before the first car of the day: housing undamaged, panel lighting up, spout clear, and the body sitting flat on its feet.
  2. Fill through the top spout from the bottle, keeping the ultrasonic fog cooler upright and the spout clean so nothing runs down the casing.
  3. Place the unit where the fog will reach the cabin — on the passenger floor, on the bench beside an open door, or wherever your own procedure puts it.
  4. Touch the power button and read the front display to confirm the cycle has started before you walk away.
  5. Close the cabin while it works. A car ultrasonic atomizer needs still air; doors left open let the mist out before it reaches the vents.
  6. Wipe the front panel if fog settles on it, and keep the spout closed between cars so shop dust stays out of the tank.
  7. When the cycle ends, open the doors, let the cabin air out for a few minutes, then wipe any film from the glass and hard trim before the keys go back.
  8. Drain the tank at the end of the day if the unit will stand unused, and wipe the spout — liquid left sitting is the usual reason a nozzle blocks.

Specifications

ModelT-660
Product nameUltrasonic Fog Cooler
BrandSURAINBOW
Unit typeCar washer / car interior air purification unit
ColourRed and black housing
Net weight2.030 kg per unit
Dimensions37 × 23 × 36 cm
Primary useCar indoor air purification
Place of originGuangdong, China
CustomisationOEM or ODM
Units per carton8
Carton dimensions65 × 50.5 × 55 cm
Carton gross weight17.960 kg
Order quantityFrom 10 units; customised runs agreed per project

Sampling, Approval & After-Sales

  1. Start with a brief: the liquid you intend to run, the market you sell into, the label language and the pack count you need.
  2. We send a unit for testing against that brief. As an ultrasonic fog cooler manufacturer we check the same points you will — fog output, panel behaviour, spout and seal, and how the housing travels.
  3. Seal the approved unit and the record of how it was tested. On an ultrasonic atomizer oem project that sealed sample is what the bulk order is checked against, so label it and store it where it can be found.
  4. Agree the packaging artwork in the same round. A car wash atomizer sold into a wash chain and one sold into a distribution channel need different carton copy, and the proof you sign is the version that goes to print.
  5. Confirm label text, barcode and any claim wording before proofing. Artwork changes after printing are the most common reason a first order slips.
  6. Before the balance is released, check the inspection record, the document set and the carton marks. A car atomizer supplier who sends these ahead of the ship date gives your broker time to clear the goods without a hold.
  7. After delivery, keep the batch record and the retained sample together with the carton marks. If a unit or a batch is questioned, quote the batch number with photos and the storage conditions, and the comparison against the sealed sample can start straight away.

Packing, Ordering & Delivery

Minimum order10 pcs
Units per box8 pcs
Batch carton size65 × 50.5 × 55 cm
Batch gross weight17.960 kg
AvailabilityIn stock and fast shipping
Market versionConfirm plug type and voltage for your destination with our team
Export documentsSDS, CoA, packing list and commercial invoice — confirm the set your market requires
PaymentBalance settled against the proforma invoice before dispatch
Shipping methodConfirmed per order, destination and volume

Scale & Supply Capability

SURAINBOW is run by Guangzhou Liangdian Automotive Supplies Co., Ltd., a factory-trade operation set up in Guangzhou in 2010 and now 50 people strong. Sixteen years in car care have given us a one-stop supply position: our own SURAINBOW lines are held in stock for fast shipping, and an associate factory with modern production equipment and an established quality management system keeps replenishment moving. We take OEM and ODM work and our R&D team develops to your specification. Buyers in the Middle East, the United States, Southeast Asia, Europe, the UK, Russia, Africa and Australia already order from us.

FAQ

What does the ultrasonic fog cooler actually do inside a car?

It turns the liquid in the tank into a fine, cool fog that spreads through the cabin air and reaches the vents, the seat foam and the headliner. It treats the air and the soft surfaces after vacuuming and wiping — it is not a washer and does not replace the interior clean.

How many cars will one fill cover?

That depends on the tank volume of the version you receive and the dose you run per car, so ask us for both figures before you set a price. Once you have them, a car air purification atomizer is simple to schedule: one fill, one bay, a queue of cars.

Can we run our own interior disinfectant through it?

Discuss the liquid with us before the first job. A car ultrasonic atomizer performs optimally with a product formulated for ultrasonic fogging; thick or mineral-heavy liquids leave residue on the plate and cut the output. Send the liquid's technical sheet and we will tell you whether it suits the tank and the plate.

What do the touch button and the front display control?

The touch button on the front panel starts and stops the cycle, and the display shows the unit's running state in clear digits. It is the only control the operator touches, which keeps handover short when staff rotate through the bay.

Is the machine sold for hygiene work or for odour control?

Both routes exist and they use different liquids. Run an ultrasonic sterilization atomizer programme where local rules allow hygiene wording, or an odour-focused liquid where they do not. Check the claim your market permits before the service goes on the menu.

Does it replace an interior cleaning gun?

No. The tornado guns are wet tools: a car wash atomizer of that type sprays cleaning liquid onto trim and lifts dirt out. This unit works on the air and the soft trim, so it is the step after the gun and the vacuum, not a substitute for either.

What maintenance does it need between jobs?

Wipe the glossy housing, keep the top spout and nozzle clear, and do not leave liquid standing in the tank when the unit will sit unused. Check the feet and the handle when you check the panel — they take the daily wear.